VM13-83 Data Set
| Position | Description | VM13-83 |
| 1 | Dust Cover: Cable Adjuster | VM13/157 |
| 4 | Carburettor Top | VM13/228 |
| 5 | Seal: Carburettor Top | VM13/174 |
| 6 | Spring: Throttle Return | VM18/162 |
| 7 | Retaining Plate: Jet Needle | VM13/186 |
| 8 | E Clip: Jet Needle | VM11/47 |
| 9 | Jet Needle | #Variable |
| 10 | Throttle Valve | VM13/187-size |
| 11 | Needle Jet | VM13/151-size |
| 12 | Dust Cover: Cold Start Assy | N106211 |
| 16 | Spring: Cold Start Assy | VM19/113 |
| 17 | Plunger: Cold Start Assy | VM13/180 |
| 19 | Gasket: Float Bowl | VM13/152 |
| 21 | Pilot Jet | N100606-size |
| 22 | Pivot: Float Arm | VF14T9/21 |
| 23 | Float Arm | See Pos 24 |
| 24 | Float | VM13/148 |
| 25 | Float Bowl | VM13/155 |
| 28 | Main Air Jet | Fixed |
| 29 | Pilot Air Screw | MD16/15 |
| 30 | Spring: Pilot Air Screw | M12F/46a |
| 31 | Spring: Tickover Screw | M12F/46a |
| 32 | Tickover Screw | VM15/30 |
| 34 | Float Valve Assy | VM13/149-needle |
| 36 | Main Jet | N102221-size |
| 38 | Screw: Float Bowl | CW/-0414 |
| 39 | Cold Start Assy: Knob Type | VM36/25 |
| 41 | Sleeve: Carb Mount | VM13/150 |
| 47 | Screw: Carb Mounting Clamp | C2=0525 |
| 48 | Nut: Carb Mounting Clamp | VM16/66 |
| MOUNT TYPE | Clamp-on | MAIN JET | N102221-Size | 62.5 |
| TICKOVER POSITION | Left | PILOT JET | N100606-Size | 40 |
| COLD START POSITION | Top | NEEDLE JET | VM13/151-Size (295) | E-8 |
| COLD START TYPE | Knob | JET NEEDLE | 3J2 | — |
| AIR SCREW POSITION | Left | STARTER JET | Fixed | — |
| FLANGE PITCH (MM) | — | PILOT AIR JET | — | — |
| CLAMP DIA (MM) | 20 | PILOT AIR SCREW | MD16/15A | 1.25 Turns out |
| FRONT SPIGOT DIAMETER (MM) | — | MAIN AIR JET | Fixed | — |
| REAR SPIGOT DIAMETER (MM) | 20 | POWER JET | — | — |
| LENGTH (MM) | 69 | THROTTLE VALVE | VM13/187-Size | 2.0 |
| HEIGHT OVER BORE CENTRELINE (MM) | 62 | FLOAT VALVE | VM13/149 | Fixed |
| HEIGHT UNDER BORE CENTRELINE (MM) | 43 | — | — | — |
| FUEL INLET POSITION | Right | — | — | — |
| FLOAT HEIGHT (MM) | 17.5 | — | — | — |