Carburettor Mounting Rubber Manifold Dimension Information Page
Manifolds – Carb Rubbers
 |
 |
NITRILE SLEEVE RUBBERS
(All dimensions in MM)
Part #ABCDEFAppComments
| Part # | A | B | C | D | E | F | App | Comments | |
| SR01 |  |
35.00 | 35.00 | 10 (R) | 8 (R) | 29.00 | 47.50 | VM26/28 | |
| SR02 | |
40.00 | 40.00 | 8 (R) | 8 (R) | 31.00 | 55.00 | VM30 | Straight |
| SR03 | |
40.00 | 40.00 | 8 (R) | 8 (R) | 31.00 | 49.00 | VM30 (T120) | T120 Alloy Stub Fitment |
| SR04 | |
40.00 | 40.00 | 8 (R) | 8 (R) | 33.00 | 55.00 | VM32 | Straight |
| SR05 | |
40.00 | 40.00 | 8 (R) | 8 (R) | 34.50 | 55.00 | VM34 | Straight |
| SR06 | |
43.00 | 43.00 | 8 (R) | 8 (R) | 36.50 | 58.50 | VM36 | Straight |
| SR07 | |
43.00 | 43.00 | 8 (R) | 8 (R) | 38.50 | 58.50 | VM38 | Straight |
| SR08 | |
52.00 | 52.00 | 8 (R) | 8 (R) | 41.50 | 66.50 | VM40 | Straight |
| SR09 | |
52.00 | 52.00 | 8 (R) | 8 (R) | 45.00 | 66.50 | VM44 | Straight |
| SR10 | |
40.00 | 42.00 | 8 (R) | 8 (R) | 34.50 | 55.00 | VM34 (BMW) | BMW ‘R’ Bikes |
| SR11 | |
40.00 | 42.00 | 8 (R) | 4 (R) | 33.00 | 55.00 | VM32 (MT500) | Amstrong ex army bike |
| SR12 | |
43.00 | 42.00 | 8 (R) | 8 (R) | 36.50 | 58.50 | VM36 (BMW) | BMW ‘R’ Bikes |
| SR13 | |
43.00 | 45.50 | 8 (R) | 5 (R) | 38.00 | 58.50 | VM38 (Special) | Mikuni-Dellorto |
| SR14 | |
40.00 | 37.00 | 10 (R) | 10 (R) | 29.00 | 49.00 | VM28 (Special) | Unknown |
| SR15 | |
46.00 | 46.00 | 8 (R) | 8 (R) | 42.00 | 58.50 | Unknown | Unknown |
| SR16 | |
50.00 | 46.00 | 4 (S) | 4 (S) | 40.00 | 63.00 | FCR39 | Fireblade EFI |
| SR17 | |
50.00 | 50.00 | 4 (S) | 4 (S) | 43.00 | 63.50 | FCR41 | Radical Busa |
| SR18 | |
50.00 | 50.00 | 4 (S) | 4 (S) | 43-40 | 63.50 | FCR39 | Busa |
| SR19 | |
30.00 | 30.00 | 6 (R) | Lipped | 27.00 | 47.50 | CR26 | T150/T160 |
| SR20 | |
37.00 | 40.00 | 8 (R) | 8 (R) | 31.00 | 49.00 | VM30 (Small Body) | |
| SR21 | |
33.00 | 33.00 | 6 (R) | 6 (R) | 28.50 | VM28-418 (TM28) | Straight | |
| SR22 | |
33.00 | 34.00 | 6 (R) | 8 (R) | 28.50 | VM28-418 (TM28) | To fit flange | |
| SR23 | |
31.00 | 31.00 | 6 (R) | 6 (R) | 27.50 | 45 | GSXR250 carbs | Straight |
| SR24 | |
40.00 | 40.00 | 8(R) | 8 (R) | 34.00 | VM34 | Angled T140E Rubbers | |
| SR25 | |
52.00 | 43.00 | 6 (R) | 8 (R) | 42-36 | VM36-4 | BMW ‘R’ Bikes with huge spigots | |
| SR26 | |
47.00 | 47.00 | 6 (R) | 6(R) | 38.00 | |||
| SR27 | |
43.00 | 43.00 | 8(R) | 8(R) | 40.00 | |||
| SR28 | |
31.00 | 31.00 | 6(R) | 6(R) | 24.00 | TM24-9 | ||
| SR29 | |
49.00 | 49.00 | 3.50(S) | 3.50(S) | 45.00 | HSR45 | ||
| SR30 | |
35.00 | 40.00 | 10(R) | 8(R) | 29.00 | 47.5 | VM26-8639 VM26-8637 VM26-665 |
Various with 40mm spigots |
| SR31 | |
37.00 | 35.00 | NONE | 10(R) | 29.00 | 47.50 | VM26/28 | ?? |
| SR32 | |
40 | 42 | 8(R) | 8(R) | 34 | |||
| SR33 | |
52 | 40 | 6 (R) | 8 (R) | 42-36 | ? | VM34-168, VM34-275 | BMW ‘R’ Bikes with huge spigots |
| SR34 | |
40 | 40 | 8(R) | 5(R) | 34 | 55 | TM35-1 | Lambretta TS1 Manifolds |
| SR35 | |
46 | 43 | 5(R) | 8(R) | 40 | 58.5 | VM38-9 | PHM40 manifolds |
| SR36 | |
35 | 30 | 10(R) | Lipped | 29 | 47.5 | VM26-8639, VM26-8637, VM28-57 | Triumph T150/160 |
| SR37 | 33 | 35 | 3.5(S), 10.5(S) | 8(R) | 26 | 47.50 | VM24-489 | Moto Guzzi Small block, double bead groove rubbers | |
| SR38 | 43.00 | 43.00 | 8 (R) | 8 (R) | 40 | 58.50 | ??? | Straight | |
| SR39 | |
35.00 | 35.00 | 8 (R) | 8 (R) | 29.50 | 47.50 | VM26/28 | JD Specials for CB500/4 with JD manifolds |
| SR40 | |
40.00 | 42.00 | 5 (R) | 8 (R) | 34.50 | ? | Flatslide TM34-2? to Dellorto Fitting? | ? |
| SR42 | 46 | 40 | 8 (R) | 8 (R) | 33 | – | VM32 | GT500 | |
NITRILE PLATE MANIFOLDS
(All dimensions in MM)
| Part # | A | B | C | D | E | App | Comments | |
| PM01 | |
50.80 | 8.1+CB | 29.00 | 35.00 | 10(R) | VM26/28 | 2″ ctrs |
| PM02 | |
50.80 | 8.1+CB | 31.00 | 40.00 | 8(R) | VM30 | 2″ ctrs |
| PM03 | |
50.80 | 8.1+CB | 33.00 | 40.00 | 8(R) | VM32 | 2″ ctrs |
| PM04 | |
70.00 | 6.20 | 34.50 | 40.00 | 8(R) | VM34 | XS650 |
| PM05L | |
70.00 | 6.20 | 34.50 | 40.00 | 8(R) | VM34/LH |
XS650, vac fitting |
| PM05R | |
70.00 | 6.20 | 34.50 | 40.00 | 8(R) | VM34/RH |
XS650, vac fitting |
| PM06 | |
70.00 | 6.20 | 36.50 | 43.00 | 8(R) | VM36 | XS650 |
| PM07L | |
70.00 | 6.20 | 36.50 | 43.00 | 8(R) | VM36/LH |
XS650,vac fitting |
| PM07R | |
70.00 | 6.20 | 36.50 | 43.00 | 8(R) | VM36/RH |
XS650,vac fitting |
| PM08 | |
70.00 | 6.20 | 36.5-34.5 | 43.00 | 8(R) | VM36 | XS650, taper bore |
| PM09L | |
70.00 | 6.20 | 36.5-34.5 | 43.00 | 8(R) | VM36/LH |
XS650, taper bore, vac fitting |
| PM09R | |
70.00 | 6.20 | 36.5-34.5 | 43.00 | 8(R) | VM36/RH |
XS650, taper bore, vac fitting |
| PM10 | |
62.00 | 6.20 | 31.00 | 40.00 | 8(R) | VM30 | K4 |
| PM11 | |
62.00 | 6.20 | 33.00 | 40.00 | 8(R) | VM32 | K4 |
| PM12 | |
60.00 | 8.20 | 31.00 | 40.00 | 8(R) | VM30 | T20 |
| PM13 | |
60.00 | 8.20 | 33.00 | 40.00 | 8(R) | VM32 | T20 |
| PM14 | |
64-66.5 | 8.10 | 34.50 | 40.00 | 8(R) | VM34 | TR500 |
| PM15 | |
63 (2mm Offset from Centre) | 6.20 | 35.50 | 40.00 | 8(R) | VM34 | RG500 |
| PM16 | |
65.00 | 8.00 | 38.00 | 43.00 | 8(R) | VM36 | GP ctrs (Goldie, CB450, etc) |
| PM17 | |
50.80 | 8.1+CB | 31.00 | 37.00 | 8(R) | VM30 (Small body) | 2″ ctrs |
| PM18 | |
70.00 | — | 33.00 | 40.00 | — | TM33, DR350 | Std Suzuki Part |
| PM19 | |
50.80 | 8.1+CB | 28.00 | 35.00 | 5.5(R) | VM24-489 | 2″ ctrs |
| PM20 | |
60 | 8.1+CB | 24 | 31 | 6(R) | TM24-9 | – |
| PM21 | |
60 | 8.1+CB | 28 | 33 | 6(R) | VM28-418 (TM28) | – |
| PM22 | |
8.1+CB | – | – | – | – | – | |
| PM23 | |
50.80 | 8.1+CB | 29 | 35.00 | 4(S) | PWK28-29S | – |
| PM24 | |
48.00 | 6.1+CB | 29 | 35.00 | 10(R) | VM26/28 | – |
| PM25 | |
63 (2mm Offset from Centre) | 6.2 | 35.5 | 40 | 5(R) | TM35-1 (Requiring Shortened Length | RG500 |
| PM26 | |
54mm | 8.2 | 29 | 35 | 10(R) | VM26/28 | Kawasaki W1, W2, W3 |
| PM27 | 70 | 8.2 | 39 | 42 | 8(R) | – | – | |
| PM28 | 60 | 8.2 | 34 | 40 | 8(R) | VM30, 32, 34 | VM34-200 Substitute | |
| PM29 | 70 | 8.2 | 38 | 43 | 8(R) | VM36, VM38 | VM36-200 Substitute | |
| PM30 | 60 | 8.2 | 36 | 42 | 6.5(S) | PWK35 | ||
| PM31 | 74.60 | 8.2 | 38 | 43 | 8(R) | VM36, 38 | VM38-200 Substitute | |
| QM01 | 54×47 | 6.2+CB | 38 | 41 | 8(R) | OEM Yamaha Mikuni | TZ250L/TZ250K | |
| QM02 | 71×52 | 6.2 | 39 | 44 | 3.5(S) | ‘Honda 125’ | 10° angle | |
| VM28-200 | |
60.00 | – | 30.00 | 35.00 | 10(R) | VM24-489 | – |
| VM30-200 | |
57.50 | 9.0 | 31.00 | 37.00 | 8(R) | VM30 Small Body | – |
| VM32-200 | |
75.00 | 8.00 | 35.50 | 40.00 | 8(R) | VM30, 32, 34 | – |
| VM32-454 | 75.00 | 8.00 | 36.00 | 40.00 | 8(R) | VM30, 32, 34 | – | |
| VM34-200 | |
60.00 | – | 36.00 | 40.00 | 8(R) | VM30, 32, 34 | – |
| VM36-200 | |
70.00 | – | 39.00 | 43.00 | 8(R) | VM36, 38 | – |
| VM38-200 | |
74.60 | – | 38.00 | 43.00 | 8(R) | VM36, 38 | – |
| VM40-200 | |
75.00 | – | 46.00 | 52.00 | 8(R) | VM40, 44 | – |
| VM44-200 | |
84.00 | – | 46.00 | 52.00 | 8(R) | VM40, 44 | – |
| KHS-004 | 70-75 | – | 40.00 | 43.00 | – | VM36-40 | – | |
| HS42/018-42 | 70-74 | – | 43.00 | 46.00 | 3.5(S) | HSR42 | Rajay Turbo Flange | |
| HS42/018-45 | 70-75 | – | 46.00 | 49.00 | 3.5(S) | HSR45 | – | |
| HS42/018-48 | 74-78 | – | 49.00 | 53.00 | 3.5(S) | HSR48 |